5.4.5 Manually erasing a document stored in a scan box
q To erase a file from the computer
In the scanner dialog box, right-click on the file. Then select "Delete" from the
pop-up menu to delete the selected file.
q To erase a file from the machine
1
Press <Menu>, <4>, <2>, <4>, <Enter>.
Select Scan Box
01:01
2
Use < q > or <p> to select the scan box that stores the file you want to
erase. Then press <Enter>.
3
The machine prompts you to enter the I.D. code of the scan box. Enter
the four-digit I.D.code using the numeric keys.
01:Scan Box Document
Enter I.D. Code:****
Press <Enter>.
NOTE
• If you have set "0000" for the I.D. code of this scan box, skip to step 4.
• If you enter an invalid I.D. code, the machine will return to the
standby mode.
If the scan box is empty, the following message will appear and the
machine will go back to step 2.
Select Scan Box
No Document Stored
5-12