NOTE
When loading the new roll media, cut the front edge of the media if it is not straight.
4.4.3 Cutting media
When you increase the pressure for the media, lower the media loading lever further.
N°.
1
Step 9:
Close the front cover.
The Media type setup menu is displayed.
TIP
To change the media type, follow "3.4.3 Setting the User Type Setting" and set the media
type.
3.2.3
Setting the User Type Setting
Step 1:
switch ON the printer and load media.
Media loading lever
Name
3-36
CS9360 User's Guide
1