Oce CS9360 User Manual page 26

NOTE
If the operation panel is in the following status, the power is ON.

[Power] is pressed in.

The Power lamp lights up in blue.

Press the key once again to switch OFF the power.

The printer starts the procedure to switch the power OFF.

"Power Off" is displayed.

NOTE
If the head height is set to High, "Set Height to Low" is displayed and the procedure to

switch the power OFF stops.
To restart the procedure, return the head height to Low.
4.2.5.2 When returning the print head to the original position
All the lamps and the LCD monitor are switched OFF.

The printer automatically switches the power OFF.

NOTE
If there is a problem during switching OFF operation, a message is displayed and the

printer may stop operating.
After switching OFF the printer, wait for ten seconds or longer to switch it ON again.

3-26
CS9360 User's Guide