Oce CS9360 User Manual page 123

CS9360 User's Guide
NOTE
Replace the cutter in a short time. Leaving the print head at the cutter replacement

position may result in clogging of the print head.
Step 5:
Press the tab of the cutter lightly, turn the cutter holder in the direction as illustrated below.
NOTE
Do not press the tab of the cutter strongly or suddenly let go of it.

There is a spring in the cutter holder and it may fly out.
Do not push the cutter all the way in. The cutter blade may damage the inside of the

printer.
N°.
1
2
Cutter holder
Cutter holder lever
6-123
1
Name
2