Oce CS9360 User Manual page 45

CS9360 User's Guide
NOTE
Perform rough adjustment first when the amount of misalignment cannot be judged.

Step 3:
Print the confirmation pattern and check if the printer is adjusted properly.
3.6.1.1 Standard Confirmation Pattern
Step 4:
If the printer is not adjusted, go back to Step 2.
NOTE
When you are not satisfied with the result of rough adjustment, perform micro

adjustment.
Standard Confirmation Pattern
Print the confirmation pattern for the print mode in the user type setting which is currently set.
Step 1:
switch ON the printer and load the roll media.
3.4.2 Setting Roll Media
Step 2:
Display the Adjust Print menu.
a. Press [Menu].
"Menu1: Setup>" is displayed.

The operation panel shifts to the Setup menu display.

b. Press [+] or [–] to select "Set 1: User Type".
3-45