Media Feed Compensation - Oce CS9360 User Manual

CS9360 User's Guide
4.1.5

Media feed compensation

The feeding length depends on the media type. The following or similar results may be seen in prints.
Printed images overlap.

White lines are printed on images.

The accuracy of media feeding may be improved with the following methods.
Step 1:
Adjust the media feed compensation value.
4.2.6.1 Procedure for the media feed compensation value
Step 2:
Fix the media firmly.
4.2.6.2 How to fix the media firmly
Procedure for the media feed compensation value
Step 1:
Display the Dist.Adj menu.
a. Press [Menu].
Menu1: Setup>" is displayed.

The operation panel shifts to the Setup menu display.

b. Press [>].
"Set1: User Type" is displayed.

c. Press [Enter].
"User: Type 1" is displayed.

d. Press [+] or [-] to select the media type to use.
e. Press [Enter].
"**>1: Print Mode" is displayed.

TIP
The selected media (Type 1 to 30) is displayed in "**".

f. Press [+] or [–] to select "**>3: PF Adjust>".
g. Press [>].
"PF1: Initial Print" is displayed.

Proceed to Dist.Adj menu.

5.1.1.1.4 Media feed compensation
Step 2:
Performs initial adjustment printing.
a. Press [Enter].
"Feed Length: 250 mm" is displayed.

5.1.1 User Type menu
4-75