YOKOGAWA WT210 User Manual page 44

1.
IM 760401-01E
When the crest factor is set to 6
1.
(Display C)
CURRENT
2.
Filter/Scaling/Averaging/External Sensor Input/Initializing set-up parameters
1.
(Display C)
SETUP
2.
Integration Setting
1.
RESET
2.
SHIFT INTEG SET
Turning the Harmonic Measurement Function ON/OFF
(Display C)
START
2.
SHIFT HARMONICS
Storing/Recalling to/from Internal Memory
1. ( Display C )
STOP
2.
SHIFT MEMORY
1.3 Digital Numbers and Characters and Initial Menus
For option /EX1
(Display C)
2.
(Set the line filter)
(Set the frequency filter)
(Set averaging)
(Set scaling)
(Set the external sensor input)
(Initialize the setup parameters)
(Select the computation item)
(Select the measurement synchronization source)
(Select the number of displayed digits)
(Select the display update rate)
(Select the crest factor)
(Display C)
(Set the integration mode)
(Set the integration timer)
(Set the rated integration time)
(Set OFF)
(Set ON)
(Sets the target element (WT230 only))
(Set the PLL source)
(Select the computation method of harmonic distortion)
(Set measured data storage)
(Set measured data recall)
(Set setup parameter storage)
(Set setup parameter recall)
1
For option /EX2
(Display C)
2.
1-7