YOKOGAWA WT210 User Manual page 228

14.3 Commands
Command
DISPlay Group
:DISPlay<x>?
:DISPlay<x>:ELEMent
:DISPlay<x>:FUNCtion
:DISPlay<x>:MODE
:DISPlay<x>:RESolution
HARMonics Group
:HARMonics?
:HARMonics:DISPlay?
:HARMonics:DISPlay:ORDer
:HARMonics:ELEMent
:HARMonics[:STATe]
:HARMonics:SYNChronize
:HARMonics:THD
INTEGrate Group
:INTEGrate?
:INTEGrate:MODE
:INTEGrate:RESet
:INTEGrate:STARt
:INTEGrate:STOP
:INTEGrate:TIMer
MATH Group
:MATH?
:MATH:ARIThmetic
:MATH:AVERage
:MATH:CFACtor
:MATH:TYPE
MEASure Group
:MEASure?
:MEASure:HARMonics?
:MEASure:HARMonics:ITEM?
:MEASure:HARMonics:BINary?
:MEASure:HARMonics:ITEM:PRESet
:MEASure:HARMonics:ITEM:{SYNChronize|<harmonic measurement function>}
:MEASure:HARMonics:VALue?
:MEASure:HEADer
:MEASure:NORMal?
:MEASure[:NORMal]:BINary?
:MEASure[:NORMal]:ITEM?
:MEASure[:NORMal]:ITEM:PRESet
14-12
Description
Queries all the display settings.
Sets/queries the element to be displayed.
Sets/queries the function to be displayed.
Sets/queries the contents of the display.
Sets/queries the number of display digits.
Queries all settings related to harmonic measurement.
Queries all settings related to the display in case of harmonic measurement.
Sets/queries the order of the harmonic component to be shown
on display B.
Sets/queries the element for harmonic measurement.
Sets/queries the harmonic measurement mode ON/OFF.
Sets/queries the input to be used as PLL source.
Sets/queries the computation method for harmonic distortion.
Queries all settings related to integration.
Sets/queries the integration mode.
Resets the integration values.
Starts integration.
Stops integration.
Sets/queries the integration timer.
Queries all settings related to the computing function.
Sets/queries the computing equation of the four arithmetic operations.
Sets/queries the average active power computation during integration.
Sets/queries the computing equation of the crest factor.
Sets/queries the computing equation.
Queries all settings related to measurement/computation data.
Queries all settings related to harmonic measurement data.
Queries all settings related to the output items of harmonic measurement data.
Queries harmonic measurement data set by commands other than
"MEASure:HARMonics:ITEM" (binary format).
Sets the ON/OFF pattern for all communication outputs of the harmonic
measurement function.
Sets/queries the communication output item of harmonic measurement ON/OFF. 14-30
Queries harmonic measurement data set by commands other than
"MEASure:HARMonics:ITEM" (ASCII format).
Turns ON/OFF the additional information output when outputting
measured/computed data in binary format.
Queries all settings related to normal measured/computed data.
Queries normal measurement data set by commands other than
"MEASure[:NORMal]:ITEM" (binary format).
Queries all settings related to the output items of normal
measured/computed data.
Sets the ON/OFF pattern for all communication outputs of the normal
measurement function.
Page
14-22
14-22
14-23
14-23
14-23
14-24
14-24
14-24
14-24
14-24
14-25
14-25
14-25
14-25
14-25
14-25
14-25
14-25
14-26
14-26
14-26
14-26
14-27
14-29
14-29
14-29
14-29
14-29
14-30
14-30
14-30
14-30
14-30
14-31
IM 760401-01E