YOKOGAWA WT210 User Manual page 12

Conventions Used in This Manual
x
Symbols Used on Pages Describing Operating Procedures
The following symbols are used to distinguish the contents of the explanations.
Indicates the keys and indicators related to the settings.
Keys
The procedure is explained using a flow diagram. For the meaning
Procedure
of each operation, see the example below. All procedures are
written with inexperienced users in mind; exp
erienced users may not need to carry out all the steps.
Example
1.
SETUP
SHIFT OUTPUT
The flow diagram above indicates the following setup procedure.
You can set up the display that is blinking.
1. Press the SHIFT key to illuminate the SHIFT indicator and then press the
SETUP(OUTPUT) key.
The output setup menu appears on display C.
2. Press the or
The four selectable items appear repetitively by pressing either key.
3. Press the ENTER key to confirm the settings.
The setup menu corresponding to the function selected in step 2 appears on display C.
4. Press the or
The six selectable items appear repetitively by pressing either key.
5. Press the ENTER key to confirm the settings.
When entering a sign or a value, an under bar blinks at the corresponding entry
digit if the digit is blank (space).
This section describes the setup parameters and the limitations
Explanation
regarding the procedures.
(Display C)
2.
3.
ENTER
key to select rELAY.
key to select oFF or on.
(Display C)
5.
ENTER
End of
4.
setting
IM 760101-01E