YOKOGAWA WT210 User Manual page 177

IM 760401-01E
Command
/HAM (option) HA m (Harmonics Analize)
HE m (Harmonics Eiement)
PS m (Pll Source )
DF m (Distortion Formula)
OR (harmonics ORder)
OH m1,m2
(Output Harmonics function)
/DA (option) OA m1,m2,m3 (Output Analog) sets output items yourself
OAD m (Output Analog Default) sets default output items
RT m1,m2,m3
(integrate Rated Time)
/CMP (option) YO m (relaY On)
YM m (relaY Mode)
DY m (Display relaY)
YC m (relaY Channel)
OY m1,m2,m3,m4,m5
(Output relaY function)
OYH m1,m2,m3,m4,m5,m6
(Output relaY Harmonic function) measurement
Note
If commands relating to options are used on instruments which do not have the options
installed, "Err. 11" is displayed. Also, there are no responses to inquiries.
10.7 Commands (before the IEEE 488.2 Standard)
Description
sets harmonic measurement ON/OFF
sets harmonics element
sets PLL source
sets distortion formula
sets display order
sets communication or output block
sets integration time
sets comparator function ON/OFF
sets comparator mode
sets display relay ON/OFF for comparator
sets the display channel when comparator
display is ON
sets the output relay function for normal
measurement
sets the output relay function for harmonic
10
10-17