YOKOGAWA WT210 User Manual page 226

14.2 Program Format
Using the COMMunicate:WAIT command
The "
COMMunicate:WAIT
communications until a specific event is generated.
Example
STATus:FILTer1 FALL;:STATus:EESR?;
[:CONFigure]:VOLTage:
RANGe 60V<PMT>
(Response to STATus:EESR? is decoded.)
COMMunicate:WAIT 1;:
MEASure[:NORMal]:VALue?<PMT>
For a description of "
STATus:FILTer1 FALL
" ", refer to "Using the extended event
STATus:EESR?
register" on this page.
" " means that communications
COMMunicate:WAIT 1
is halted until bit 0 of the extended event register is
set to " ".
1
"
MEASure[:NORMal]:VALue?
until bit 0 of the extended event register is set to "
14-10
" command halts
" and
" will not be executed
1 ".
IM 760401-01E