YOKOGAWA WT210 User Manual page 150

9.6 Setting the Comparator Limit Values (Option)
1.
SETUP
SHIFT OUTPUT
Set the relay
( Display C )
6.,20.
9-14
Setting the Comparator Limit Values in case of Harmonic Measurement
Select the comparator function
( Display C )
2.
Set the type of limit
7.
( Display A )
ENTER
8.
A B C
8.
sets the A column (type of limit)
9.
moves to the B column
SHIFT
10. selects from element 1 to 3
11.
moves to the C column
SHIFT
12. selects from harmonic order 01 to 50
21.
ENTER
End of setting
3.
( Display C )
ENTER
4.
Set the limit value
13.
( Display B )
ENTER
14.
sets the value
15.
SHIFT
16.
•
SHIFT
*1 When you press the
the output channel displayed at display C will
change to the next channel, i.e. from ch1 to ch2
and so forth.
*2 Depends on the model number. Refer to the
explanation for more details.
*3 As the maximum order of harmonic analysis data
varies by the fundamental frequency, there might
be cases where no analysis data are present up
to the 50th order (display show bars). In such a
case, even setting the limit values will not result
in proper operation.
*4 The first digit is for the polarity. Select "–" in case
of a negative value, and nothing incase of a positive
value.
*2
5.
ENTER
*4
Set the exponent
17.
( Display C )
ENTER
18.
shifts digits
moves the
decimal point
ENTER
key at step 19,
*3
19.
*1
ENTER
IM 760401-01E