YOKOGAWA WT210 User Manual page 230

14.3 Commands
Command
STORe Group
:STORe?
:STORe:INTerval
:STORe:PANel
:STORe[:STATe]
Common Command Group
*CAL?
*CLS
*ESE
*ESR?
*IDN?
*OPC
*OPC?
*OPT?
*PSC
*RST
*SRE
*STB?
*TRG
*TST?
*WAI
14-14
Description
Queries all settings related to storing data.
Sets/queries the interval for storing data.
Saves the setup parameters to a file.
Sets/queries the store function ON/OFF.
Executes zero-level compensation and queries the results.
Clears the standard event register, extended event register and error queue. 14-42
Sets/queries the value of the standard event enable register.
Sets/queries the value of the standard event register and clears it.
Queries the instrument model.
This command is not supported by this instrument.
This command is not supported by this instrument, and is always "1".
Queries installed options.
Sets/queries whether or not to clear some registers at power ON.
Initializes the setup parameters.
Sets/queries the value of the service request enable register.
Queries the value of the status byte register.
Executes the same operation as the TRIG(SHIFT+HOLD) key.
Executes a self-test and queries the results.
This command is not supported by this instrument.
Page
14-41
14-41
14-41
14-41
14-42
14-42
14-42
14-43
14-43
14-43
14-43
14-43
14-43
14-43
14-43
14-43
14-43
14-43
IM 760401-01E