YOKOGAWA WT210 User Manual page 170

Digital power meter
Table of Contents

Advertisement

10.4 Output Measured/Computed Data, Setup Parameters, and Error Codes
Output Format of Setup Parameters and Error Codes
10-10
Output Format
The output format depends on the selected output items which can be selected by the
"OH" command.
• In case of voltage and current
All computed values of
Line 1
the 1st to 50th order
Measured value for
Line 2
fundamental (1st order)
Measured value for 2nd
Line 3
harmonic
Measured value for 50th
Line 51
harmonic
Line 52
END
• In case of active power
All computed values of
Line 1
the 1st to 50th order
Measured value for
Line 2
fundamental (1st order)
Measured value for
Line 3
2nd harmonic
Line 51
Measured value for
50th harmonic
Line 52
END
• In case of phase angle
Phase angle between
Line 1
fundamentals
of voltage and current
Line 2
Phase angle between
fundamental and 2nd
harmonic of voltage
Line 3
Phase angle between
fundamental and
3rd harmonic of voltage
Line 50
Phase angle between
Line 51
fundamental and
50th harmonic of voltage
END
• In case of ALL setting
The data will be output in the sequence voltage → current → active power → phase
angle → END <terminator>
• The output format of each item is as described for each item above;
• The END line is not output for each item, but after finishing the entire output
operation.
See the response examples of "OS" and "OE" commands in section 13.1. For a
description of the displayed information of the response examples, see the explanation
of the respective command in section 13.1.
,
harmonic distortion
,
Frequency
Relative harmonic content
,
for 2nd harmonic
Relative harmonic content
,
for 50th harmonic
Terminator
,
Power factor
Frequency
,
Relative harmonic content
,
for 2nd harmonic
Relative harmonic content
,
for 50th harmonic
Terminator
,
Frequency
Phase angle between
fundamental and
,
2nd harmonic of current
Phase angle between
fundamental and
,
3rd harmonic of current
Phase angle between
fundamental and
,
50th harmonic of current
Terminator
Terminator
Terminator
Terminator
Terminator
Terminator
Terminator
Terminator
Terminator
Terminator
Terminator
Terminator
Terminator
IM 760401-01E

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wt230

Table of Contents