YOKOGAWA WT210 User Manual page 218

14.1 Overview of IEEE 488.2-1992
17 Size of storage area for protected user data if PUD and
18 Length of resource name if
19 Change in status if *RST,
20 Execution range of self-test using
21 Structure of extended return status
22 To find out whether each command is performed in parallel or sequentially
23 Functions performed until a message indicating completion of the command is displayed
14-2
and are not supported.
*PUD *PUD?
and are used.
*RDT *RDT?
and are not supported.
*RDT *RDT?
, , and
*LRN? *RCL *SAV
*RST
Refer to section 14.3.15 Common Command Group.
, ,
*LRN? *RCL *SAV
These commands are not supported.
*TST?
Refer to section 14.3.15 Common Command Group.
Refer to section 14.4.
Refer to section 14.2.6, "Synchronization with the Controller," or Section 14.3.
Refer to the function description of each command in Section 14.3, and to the
corresponding chapters.
are used.
*PUD?
are used.
IM 760401-01E