Performing A Text Search; Using The Result List - Maschine mikro User Manual

Selecting Tags for Instrument and Effect Presets
When browsing Instrument or Effect presets, continue as follows:
1. Press the Right Arrow button to select the
2. Turn the Control encoder to select a Mode, if any. Turn the Control encoder at full left to
remove any particular selection (i.e. to select all Modes).
3.2.6

Performing a Text Search

In the Search field you can enter your search query.
The Search field.
Click in the Search field and type the desired text to limit the results to files containing
►
this text.
The search will be performed on the file paths, the file names, the products/banks/sub-banks,
the tags, and the properties directly as you type. If you want to search for a combination of two
words (e.g. "bass" and "analog") just enter both words in the Search field with a space in be-
tween. As you start typing, the list of matches will start narrowing in the Result list below.
On the right of the Search field, click the Reset button (showing a little cross) to reset both text
search and tag search. The Product selection is not affected.
3.2.7

Using the Result List

The Result list shows all the files that match your query:
MODE field.
Searching and Loading Files from the Library
MASCHINE MIKRO - Manual - 99
Browser