Tom - Tronic - Maschine mikro User Manual

▪ Tronic (default): ↑10.5.1, Tom –
▪ Fractal: ↑10.5.2, Tom –
▪ Floor: ↑10.5.3, Tom –
For more information on engines, see
synth. For general information on the Snare and the other Drumsynths, see
synths – General
10.5.1 Tom – Tronic
The Tronic engine is the default engine of the Tom.
A fat, analog-style tom with two tunable oscillators plus a tunable FM oscillator.
The parameters described below are presented as they appear in the Control area (Arrange
view). The same parameters are available in the Plug-in panel within the Plug-in Strip (Mix
view). See ↑9.4, The Plug-in Strip
Main Page
Element
MAIN Section
Engine
Tune
Decay
Tronic.
Fractal.
Floor.
↑10.1.1, Engines: Many Different Drums per Drum-
Handling.
for more information on this.
Description
Selects the engine used in the Tom Plug-in. If you change this setting, please
refer to ↑10.5, The Toms.
Adjusts the pitch of the drum played by the middle C, measured in MIDI note
numbers and cents. Available values range from 36.00 to 60.00. The default
value is 36.00. For more details see
Notes.
Adjusts the duration of the sound's tail, measured as a percentage. Available
values range from 0.0 to 100.0 % (default: 50.0 %).
↑10.1, Drum-
↑10.1.5, Pitch Range, Tuning, and MIDI
MASCHINE MIKRO - Manual - 452
Using the Drumsynths
The Toms