Maschine mikro User Manual page 216

Sampler parameters – page 2 of 6: PITCH / GATE and AMPLITUDE ENVELOPE on the controller.
Sampler parameters – page 2 of 6: PITCH / GATE and AMPLITUDE ENVELOPE in the software.
Parameter
PITCH / GATE
Tune
Start
Reverse
Type
AMPLITUDE ENVELOPE
The AMPLITUDE ENVELOPE
over time.
Description
Defines the basic pitch of your Sample: turn the knob to the right for a higher
pitch and to the left for a lower pitch.
Determines the start point of the Sample. This parameter can also be modulated
by the Velocity control, see
If Reverse is activated, the Sample will be played backwards.
Selects from three different types of amplitude envelopes. See below for more
information.
section allows you to tailor your Sample in terms of its loudness
↑6.2.5, Page 5: LFO.
MASCHINE MIKRO - Manual - 216
Working with Plug-ins
The Sampler Plug-in