Kick - Push - Maschine mikro User Manual

Element
Impact
ROOM Section
Mode
Size
Amount
Advanced Page
For this engine the Advanced
Modulation Page
As with all other engines and Drumsynths, the
ity.
Element
SCALE Section
Velocity
10.2.8 Kick – Push
The Push kick is an acoustic bass drum emulation that provides an aggressive and brazen
sound. It is essential for mixes where a dirty, tight and powerful kick is required. Its versatility
also allows for noisy and clicky kicks.
Description
Adjusts how hard the drum is hit, measured as a percentage. Available values
range from 0.0 % (softest) to 100.0 % (hardest). The default value is 75.0 %.
Selects from two different noise types that simulate the room in which the
drum is played. Available modes are A (default) and B.
Adjusts the size of the room, measured as a percentage. Available values range
from 0.0 to 100.0 % (default: 50.0 %).
Adjusts the amount of room effect applied to the drum sound, measured as a
percentage. Available values range from 0.0 to 100.0 % (default: 75.0 %).
page does not contain any parameters.
Modulation
Description
Adjusts the velocity response of the drum. Available values range from
-100.0 % to 100.0 % (default value). At zero (mid course), the drum is played
at full velocity, no matter how hard you hit the keys (or pads). From that mid
position, by turning the knob to the right you increase the positive velocity re-
sponse and make the drum more and more sensitive to the velocities at which
you hit the keys/pads. From the mid position, turning the knob to the left as
the inverse effect: the harder you hit the key/pad, the softer the resulting drum
sound will be.
page contains one parameter:
MASCHINE MIKRO - Manual - 424
Using the Drumsynths
The Kicks
Veloc-