Choosing Between Factory And User Content; Selecting A Product Category, A Product, A Bank, And A Sub-Bank - Maschine mikro User Manual

The selected icon is highlighted and the files are filtered accordingly.
→
3.2.2.1 Selecting a File Type on the MASCHINE MIKRO Controller
On your controller in Browse mode:
1. Press F1 to select the
2. Press the Left Arrow button (if necessary, repeatedly) to select FILETYPE.
3. Turn the Control encoder to select the desired file type: PROJECT, GROUP, SOUND, INSTRUMENT,
EFFECT, or SAMPLE.
3.2.3

Choosing Between Factory and User Content

The Content selector shows 2 icons representing the factory content on the left, and the user
content on the right:
The Content selector.
Click the NI icon to search the factory content, or click the User icon to search the user
►
content.
3.2.3.1 Choosing the Factory or User Content on the MASCHINE MIKRO Controller
On your controller in Browse mode:
1. Press F1 to select the
2. Press F3 (USER) to browse the user content (button lit and
factory content (button off and
3.2.4

Selecting a Product Category, a Product, a Bank, and a Sub-Bank

The Product selector allows you to limit your search to a certain product category, a particular
product, a specific bank of the product, or even a sub-bank in this bank.
By default there is no particular selection in the Product selector: It reads
Groups, All Sounds, All
selected in the File Type selector above (see section
FILTER page.
FILTER page.
USER label not highlighted).
Instruments, All Effects
Searching and Loading Files from the Library
USER label highlighted) or the
or All Samples according to the type of file
↑3.2.2, Selecting a File
MASCHINE MIKRO - Manual - 88
Browser
All Projects, All
Type):