Playing Tools - Maschine mikro User Manual

You can select multiple Sound slots and quickly assign them all to a particular Link group
at once!
To assign the selected Sound(s) to a Link group and set its/their Link mode (Master or Slave),
do the following:
1. Click the Pad View button above the Sound List in the Pattern Editor to show the Pad
view for the focused Group.
2. In the Link section click the
choose None (default setting) to remove the Sound from its current Link group.
3. In the same Link
tween Master (default setting) and
A Link group makes sense only if more than one pad/Sound are assigned to it!
5.1.5.1 Using Link Groups on the MASCHINE MIKRO MK1 Controller
To assign the selected pad(s) / Sound slot(s) to a Link group and set its/their Link mode on
your controller:
1. Hold the PAD MODE
2. Use the Left/Right Arrow buttons to display the
3. Turn the Control encoder to select the desired Link group
(default setting) to remove the pad from its current Link group.
4. Press the Right Arrow button to display the
5. Turn the Control encoder to select the desired Link mode from
SLAVE for that pad.
6. Release PAD MODE
5.2

Playing Tools

On top of the various pad settings described in the previous section (see
Pads), MASCHINE also offers you a series of intuitive playing tools particularly useful when
playing live:
Group value and select the desired group 1–8 from the list or
section click the Mode
Slave mode.
button to enter Pad Mode (or press
(or press it again if you pinned the mode).
value (Master or Slave) to switch the Sound be-
PAD MODE
3/6: LINK GROUP parameter.
1–8 for that pad or choose
4/6: LINK MODE parameter.
MASTER
Playing on Your Controller
Adjusting Your Pads
+ MAIN to pin it).
NONE
(default setting) or
↑5.1, Adjusting Your
MASCHINE MIKRO - Manual - 181