Maschine mikro User Manual page 145

To copy and paste Sounds in the software:
1. Right-click (on Mac OS X: [Ctrl]-click) the Sound slot (in the Sound List or in the Pad
view) containing the Sound you want to copy.
2. In the context menu, choose Copy to copy the Sound.
3. To paste the Sound, right-click (Mac OS X: [Ctrl]-click) another Sound slot (this can also
be in another Group, in this case first click the desired Group in the Group List of the Ar-
ranger) and select Paste from the context menu.
All parameters of the Sound will be copied except for the source's Pattern content. The
→
Sound previously loaded in that Sound slot will be replaced.
If you want to copy a Sound more than once, just keep on choosing Paste from the context
menu on other Sound slots: the source Sound stays in the clipboard, ready for the next use!
4.2.6.1 Duplicating Sounds on the MASCHINE MIKRO MK1 Controller
On your controller in Control mode, do the following to copy a Sound from one pad to another:
1. Press and hold DUPLICATE.
2. If you want to duplicate a Sound including its Pattern content, enable the
(F1).
3. Press the pad of the Sound you want to copy.
The pad of the Sound starts blinking.
Managing Sounds, Groups, and Your Project
Managing Sounds
+ EVNT option
MASCHINE MIKRO - Manual - 145