Maschine mikro User Manual page 44

The control elements around the display.
Depending on what is shown on the display, some of the buttons might be inactive — in that
case they are off. The active buttons (i.e. those that would do something if you would press
them) are always dimmed or fully lit.
To see and edit any parameter of any Channel properties or Plug-in in any Sound, Group, or
the Master, do the following:
1. Set the focus on the Sound, Group or the Master containing the desired Channel proper-
ties or Plug-in (see section
2. Press F1 (MASTER),
of the Master, the focused Group or the focused Sound, respectively.
↑2.3.1, Setting the Focus on a Group or a Sound
F2 (GROUP) or F3 (SOUND) to display the Plug-ins and Channel properties
Basic Concepts
Common Operations
above).
MASCHINE MIKRO - Manual - 44