Maschine mikro User Manual page 535

Main Page
The Beat Delay in the Control area: Main page.
Parameter
DELAY Section
Time
Offset
Feedback
Crossover
Color
Split
OUTPUT Section
Stereo
Mix
Description
The Time parameter defines the delay length in note values. The available
values depend on the unit defined by the
(see below). They range from half a unit to 16 units.
This parameter is used to shift the start of the delay in relation to the tem-
po.
Adjusts the amount of output signal fed back into the input. Higher values
produce more copies of the signal and longer decays.
Allows for panning the feedback signal rhythmically in the stereo field.
Defines the basic frequency of the feedback circuit: lower values result in
a deeper sound, whereas higher values brighten the sound.
Controls the difference in frequency between left and right channel. At full
left, this control is disabled.
This parameter widens the stereo field of the effect. Values go from
-100.0 % to 100 % — negative values inverse the stereo field of the ef-
fect.
Mix lets you adjust the amount of the effect in relation to the dry original
audio signal.
Unit parameter on the Unit
MASCHINE MIKRO - Manual - 535
Effect Reference
Delays
page