Maschine mikro User Manual page 433

Main Page
Element
MAIN Section
Engine
Tune
Decay
Skin Tune
Impact
Body
Noise
Advanced Page
For this engine the Advanced
Modulation Page
As with all other engines and Drumsynths, the
ity.
Description
Selects the engine used in the Snare Plug-in. If you change this setting, please
refer to ↑10.2.8, Kick – Push.
Adjusts the pitch of the drum played by the middle C, measured as a percent-
age. Available values range from 0.0 % to 100.0 % (default: 50.0 %). For
more details see ↑10.1.5, Pitch Range, Tuning, and MIDI
Adjusts the duration of the sound's tail, measured as a percentage. Available
values range from 0.0 % to 100.0 % (default: 50.0 %).
Adjusts the fine-tuning of the skin of the drum, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 50.0 %).
Adjusts how hard the drum is hit, measured as a percentage. Available values
range from 0.0 % (softest) to 100.0 % (hardest). The default value is 75.0 %.
Adjusts the level of the snare body independently from the wires level adjusted
on the Advanced page (see below). Available values range from 0.0 to 100.0 %
(default: 75.0 %).
Adjusts the level and duration of the wires sound applied to the drum, meas-
ured as a percentage. Available values range from 0.0 to 100.0 % (default:
40.0 %).
page does not contain any parameters.
Modulation
Notes.
page contains one parameter:
MASCHINE MIKRO - Manual - 433
Using the Drumsynths
The Snares
Veloc-