Audio And Midi Settings - Routing Page - Maschine mikro User Manual

Setting
Status
Sample Rate
Latency
2.6.2 Audio and MIDI Settings – Routing Page
The Routing page allows you to configure the connections between the virtual inputs/outputs of
MASCHINE and the physical inputs/outputs of your audio interface.
Description
This shows you whether your audio interface is currently running.
This displays the selected sample rate of your audio interface. Please re-
start MASCHINE after changing the sample rate.
Mac OS X: This slider allows you to adjust the latency of your audio inter-
face in samples. Lower values result in a more immediate playing response
but are heavier on both the CPU and the audio driver, and may result in
audible clicks and pops. Larger values are easier on the CPU, but intro-
duce a larger latency (i.e., there may be a very small delay between when
you hit a pad and when you actually hear it). You should therefore experi-
ment with this setting so that it is as low as possible without overloading
your CPU or introducing any audio artifacts.
Windows: When using an ASIO driver, the
shows an ASIO Config button instead of the
ton to open the settings window of the selected ASIO driver.
Audio and MIDI Settings
Audio and MIDI Settings panel
Latency slider. Click this but-
MASCHINE MIKRO - Manual - 75
Basic Concepts