Maschine mikro User Manual page 663

The ZONE page on the controller, page 3 of 5: TUNE / MIX parameters.
Parameter
TUNE
GAIN
PAN
ROOT KEY
Page 4 – ENVELOPE Parameters
This amplitude envelope can be used to get rid of clicks after slicing; you can either apply it to
the Zone of the whole Sample or to individual Zones for selected Slices.
The ZONE page on the controller, page 4 of 5: ENVELOPE parameters.
This amplitude envelope can be used to get rid of clicks after slicing; you can either apply it to
the Zone of the whole Sample or to individual Zones for selected Slices.
Parameter
ATTACK
DECAY
Description
Sets the tuning of the focused Zone.
Sets the gain of the focused Zone.
Sets the panorama position of the focused Zone.
Adjusts the root key of the focused Zone, that is the key at which the Sample will
be played back at its original pitch.
Description
Adjusts how quickly the Sample/Slice reaches full volume after being triggered.
Adjusts how fast the Sample/Slice dies down.
Sampling and Sample Mapping
Mapping Samples to Zones
MASCHINE MIKRO - Manual - 663