Manually Adjusting Your Slices - Maschine mikro User Manual

Parameter
ENGINE Section
ZERO-X (Zero Crossing, De-
tect mode only)
14.4.3

Manually Adjusting Your Slices

In addition to the Split, Grid, and Detect modes that create Slices automatically (see section
↑14.4.2, Adjusting the Slicing Settings
mouse, the waveform display, and the various edit tools at your disposal.
You can directly adjust your Slices manually by selecting Manual in the
start from MASCHINE's proposed Slices as described in section
Slicing Settings
automatically switches to Manual.
Manually adjusting your Slices.
(1) Waveform display
Description
(Detect mode only)
When MODE is set to DETECT, activate
ated on the closest locations where the audio signal crosses the zero value. This
can be helpful to avoid clicks when playing back Slices in another sequence.
above), you can also adjust Slices manually using your
and fine-adjust these Slices manually — in that case the
ZERO-X to force the detected Slices to be cre-
MODE
↑14.4.2, Adjusting the
MODE
MASCHINE MIKRO - Manual - 632
Sampling and Sample Mapping
Slicing a Sample
selector, or
selector