Pitch / Envelope - Maschine mikro User Manual

Sampler parameters – page 1 of 6: VOICE SETTINGS and ENGINE in the software.
Parameter
VOICE SETTINGS
Polyphony
Glide
Pitchbend
ENGINE
Mode
6.2.2 Page 2: Pitch / Envelope
Sampler parameters – page 2 of 6:
Description
Here you can define a voice limit for the Sound, that is the maximum number of
voices (notes) the Sampler can play simultaneously. Once this polyphony has
been reached, triggering any additional note will kill the "oldest" note still play-
ing (i.e. the note that was triggered first). The available values are 1, 2, 4, 8 (de-
fault), 16, 32, and 64. You can also set this to Legato — in that case the poly-
phony is set to 1 and the Sampler performs a continuous pitch transition be-
tween consecutive notes.
If Legato is selected for the
tion of the transition between consecutive notes.
Here you can adjust how the Sound reacts on incoming MIDI Pitchbend messag-
es from an external MIDI controller or your host application. For more informa-
tion on how to setup your Sounds to receive MIDI, refer to section
gering Sounds via MIDI Notes.
This allows you to select between different models for the sampling engine. Be-
sides the default Standard setting, the other options MP60 and S1200 emulate
the sound of two legendary Samplers that are often used in Hip-Hop and similar
genres of music. The latter comes in various flavors offering different filtering:
S1200 (no filtering), S1200 L (for Low, i.e. low-pass filtering), S1200 LM (for
Low-Mid, i.e. low-mid-pass filtering), S1200 HM (for High-Mid, i.e. mid-high-
pass filtering), and S1200 High (for High, i.e. high-pass filtering).
PITCH / GATE and
Polyphony parameter, this allows to adjust the dura-
AMPLITUDE ENVELOPE on the controller.
MASCHINE MIKRO - Manual - 215
Working with Plug-ins
The Sampler Plug-in
↑8.2.1, Trig-