Maschine mikro User Manual page 621

Parameter
SRC BPM (Source BPM,
Beat mode only)
NEW BPM
(Beat Mode only)
LENGTH (Stretch
Length, Beat mode with
Auto Detection enabled
only)
SPEED
(Free mode only)
In Beat mode, if you set a target tempo that is smaller than a tenth of the original tempo,
the Apply button will be disabled. Set a higher target tempo to enable the
again!
Once you have set the parameters to the desired values, click
►
shifting and/or time stretching to the selected region in the Sample, or
Sample untouched.
14.3.2.1 Audio Editing Functions on the MASCHINE MIKRO Controller
The EDIT page additionally provides several audio editing functions to process your Sample.
Description
Allows to define the tempo of the original audio (in BPM). This tempo is defined in
different ways according to the
If AUTO DTCT is enabled, you can set the length (in bars) of the original audio.
You can choose between 1/2, 1, and 2 bars. The number between brackets indi-
cates the resulting tempo (in BPM) derived from the number of bars you have set
and the computed tempo value.
If AUTO DTCT is disabled, you can directly define the tempo of the original audio
(in BPM).
Defines the target tempo of the time-shifted audio (in BPM).
If AUTO DTCT is enabled, you can define the length of the target audio (in bars).
Please note that any change to the
cally mirrored by this LENGTH
source audio, you can set here another number of bars, thereby dividing or multi-
plying the tempo of the target audio. Available values are 1/16, 1/8, 1/4, 1/2, 1,
2, 4, and 8 bars, as well as the corresponding triplet values.
Adjusts the new tempo relative to the original tempo (in percentage). The mini-
mum value is 10 %.
AUTO DTCT value:
SRC BPM value (see above) will be automati-
value. Once you have set the number of bars in the
Apply to apply the pitch
MASCHINE MIKRO - Manual - 621
Sampling and Sample Mapping
Editing a Sample
Apply button
Cancel to let the