Maschine mikro User Manual page 623

Parameter
SILENCE
CUT
COPY
PASTE
DUPL (Duplicate)
STRCH (Stretch)
Time Stretching / Pitch Shifting
When you select STRCH
stretching / pitch shifting function. Instead, it allows you to adjust the parameters of the time
stretching / pitch shifting before you apply it to the selected region.
After you have selected
►
and the Control encoder to select and adjust the parameters. Pitch shifting and time
stretching can be applied independently.
Parameters for the Stretch function.
Following parameters are available:
Description
This silences the selected region of the Sample.
This deletes the selected region from the Sample and places it into the clipboard
for later use.
This copies the selected region of the Sample to the clipboard for later use.
This pastes the cut/copied region of the Sample, replacing the region of the
Sample currently selected.
This duplicates the selected region of the Sample. The copy is placed right after
the original region.
This allows you to apply time stretching and/or pitch shifting to the selected re-
gion of the Sample. See below for a detailed description.
(using F1/F3), pressing
STRCH and pressed
F2 (STRCH) doesn't directly perform the time
F2 (STRCH), use the Left/Right Arrow buttons
Sampling and Sample Mapping
Editing a Sample
MASCHINE MIKRO - Manual - 623