Navigating Channel Properties, Plug-Ins, And Parameter Pages In The Control Area - Maschine mikro User Manual

2.3.2.1 Switching Between the Master, Group, and Sound Level on the MASCHINE MIKRO MK1
Controller
On your controller:
1. Press the MAIN button once or twice (it must be unlit) to enter Control mode.
2. Press F1 (MASTER),
ters and Channel properties of the Master, the focused Group or the focused Sound, re-
spectively.
The selected tab lights up. The name of your Project, the focused Group or the focused
→
Sound appears on the display (under the MASTER, GROUP, and
shows the Plug-in parameters and Channel properties of the Master, the focused Group or
the focused Sound, respectively.
2.3.3

Navigating Channel Properties, Plug-ins, and Parameter Pages in the Control Area

We describe here how to display/edit any Plug-in parameters or Channel properties located in
any Sound, Group or the Master.
To select a particular Plug-in or a particular set of Channel properties, you first need to display
the parameters of the Master, the desired Group or the desired Sound:
1. To display the parameters of a particular Group or Sound, put it in focus by clicking it in
the Group List or Sound List, respectively (see section
Group or a Sound
2. In the top left corner of the Control area, click the MASTER,
display the parameters of the Master, the focused Group or the focused Sound, respec-
tively.
The Control area now displays the Plug-in parameters and Channel properties of the de-
→
sired Sound, desired Group or the Master.
F2 (GROUP) or F3 (SOUND) above the display to show the Plug-in parame-
above).
SOUND tabs), and the display
↑2.3.1, Setting the Focus on a
GROUP or SOUND
MASCHINE MIKRO - Manual - 39
Basic Concepts
Common Operations
tab to