Using Native Instruments And External Plug-Ins; Opening/Closing Plug-In Windows - Maschine mikro User Manual

Parameter
Start
Cutoff
LFO Depth
Pan
6.3

Using Native Instruments and External Plug-ins

MASCHINE allows you to load VST/AU plug-ins from Native Instruments (Native Instruments
Plug-ins) or any third-party manufacturer (External Plug-ins) and to use them like the MA-
SCHINE Internal Plug-ins.
As with Internal Plug-ins, the following rules apply for loading Native Instruments and External
Plug-ins:
▪ An Instrument Plug-in can be loaded only in the first Plug-in slot of a Sound.
▪ An Effect Plug-in can be loaded in any Plug-in slot of any Sound, any Group, or of the
Master.
The following sections describe additional features and tasks specific to Native Instruments
and/or External Plug-ins compared to Internal Plug-ins. For all other tasks (e.g., loading, ad-
justing Plug-in parameters, etc.), please refer to section
6.3.1

Opening/Closing Plug-in Windows

When you load a Native Instruments or External Plug-in into a Plug-in slot, you can open a
floating window containing the user interface of that Native Instruments or third-party instru-
ment/effect.
Modulation Destination
Start parameter of the PITCH / GATE
2).
Cutoff parameter of the FILTER
on the FX / Filter page (page 3).
Use this knob to adjust how much the Modulation Wheel affects the depth of the
LFO modulation (for all targets) defined on the
Pan parameter on the Audio
Configuring the Main Output of Sounds and Groups
Using Native Instruments and External Plug-ins
section on the Pitch / Envelope
section (with filter types LP2, HP2, BP2 only)
LFO page (page 5).
page of the Sound's Output properties (see
for more information).
↑6.1, Plug-in Overview.
MASCHINE MIKRO - Manual - 225
Working with Plug-ins
page (page
↑8.1.2,