Maschine mikro User Manual page 520

The Flanger panel in the Plug-in Strip.
The Flanger in the Control area.
Parameter
MAIN Section
Frequency
Feedback
Invert
MOD Section
Amount
Source
Speed (LFO)
Speed (LFO Sync)
Description
This defines the center frequency of the Flanger.
Adjusts the amount of output signal fed back into the input.
Inverts the Flanger.
This defines how much the Flanger gets modulated by the modulation source.
Here you can select the modulation source of the Flanger: available options are
LFO, LFO Sync, and Envelope. Depending on your selection, the parameter to
the right will change.
Defines the speed of the LFO in a range from 0.03 Hz up to 8 Hz.
Defines the speed of the LFO in note values from 16/1 (one cycle every 16
bars) up to 1/16 note.
Effect Reference
Modulation Effects
MASCHINE MIKRO - Manual - 520