Maschine mikro User Manual page 37

The focused Sound slot is highlighted.
If the desired Sound does not appear in the Sound List, use the scroll bar at the right end
of the Pattern Editor or turn your mouse wheel while hovering the Pattern Editor to display
any hidden Sounds.
You can also select multiple Sounds at once to apply changes to all of them. See section
↑4.1.3, Selecting Multiple Sounds or Groups
2.3.1.1 Setting the Focus on a Group or a Sound on the MASCHINE MIKRO Controller
Setting the Focus on a Group
1. If necessary, press
the Group bank containing that Group.
2. Press GROUP + the pad
The corresponding Group is now in focus.
→
Once the Group is focused you can use
Master, the focused Group and the last focused Sound in that Group! See section
Switching Between the Master, Group, and Sound Level
You can also select multiple Groups at once to apply changes to all of them. See section
↑4.1.3, Selecting Multiple Sounds or Groups
GROUP + the Left or Right Arrow button below the display to switch to
9–16 of the desired Group.
F1–F3 above the display to quickly switch between the
for more information.
for more information.
for more information.
MASCHINE MIKRO - Manual - 37
Basic Concepts
Common Operations
↑2.3.2,