Maschine mikro User Manual page 511

Parameter
INPUT Section
Source
Gain
FILTER Section
Filter
Center Freq
Width
On your controller the outputs available in the
play of the Source
For more information on how to use the side-chain input, please refer to section
Using the Side-Chain
The Maximizer on the controller: SIDE-CHAIN INPUT page.
Description
Selects the audio signal you want to use as side-chain signal to control the
Plug-in. Available options are None (side-chain disabled, default setting), the
outputs of all (other) Sounds , and the outputs of all (other) Groups.
In the menu these outputs are labeled as follows:
For Groups: [Group name] (e.g., Drums)
For Sounds: [Group name]: [Sound name] (e.g., Drums: Kick)
In the selector display these outputs are labeled as follows:
For Groups: [Group name] (e.g., Drums)
For Sounds: [Group letter+number]:S[Sound number] (e.g.,
4 of Group A1)
Adjusts the input level of the side-chain signal fed into the Plug-in.
Activates a filter on the side-chain input. This filter can be useful to select only
a specific frequency range of the side-chain signal to control the Plug-in.
Adjusts the center frequency of the filter.
Adjusts the bandwidth of the filter.
selector described above.
Input.
SOURCE parameter are labeled as in the dis-
MASCHINE MIKRO - Manual - 511
Effect Reference
Dynamics
A1:S4 for the Sound
↑11.1.3,