Choke All Notes - Maschine mikro User Manual

▪ When holding F3 (AUDIO) you can see on the pads which Sounds have audio mute enabled
(see above): Sounds with audio mute enabled have fully lit pads, while Sounds with only
event mute have dim lit pads. While holding
mute for this Sound on or off.
Enabling/disabling audio mute for a Sound does not mute/unmute it! It only sets this
Sound to get both its events and its audio muted when you will mute it via the usual way
(pressing MUTE
Since soloing a Sound mutes all Sounds except one, the
"release" Sounds that have been muted. You can use this technique to create a break-
down: Solo a given Sound such as a kick drum, then build the track up again by bringing
the muted Sounds back in one at a time while holding the
5.2.3

Choke All Notes

The Choke All Notes feature allows you to kill any note or event currently playing in your
Project. This affects the audio coming from all Plug-ins (Internal, Native Instruments, and Ex-
ternal).
Choke All Notes is only available on your controller:
Press SHIFT + MUTE
►
Choke All Notes can be useful in various situations:
▪ as a creative tool in a live performance, e.g. to create stutter beaks,
▪ as a workflow aid, to stop long one-shot Samples that still continue playing after you have
stopped the sequencer,
▪ as a first panic button, if you are not sure where in your Project a particular sound is com-
ing from, and you want to get rid of it.
Contrary to the Mute function, Choke All Notes is not turning any Group/Sound into another
state. Instead, all audio voices currently playing are instantaneously killed. The killed voi-
ces cannot be reactivated and are freed up for subsequent notes according to the polypho-
ny setting. Voices triggered by subsequent notes will play normally.
+ its pad).
to choke all playing notes.
F3 (AUDIO), press any pad to switch the audio
MUTE button can then be used to
MUTE button.
MASCHINE MIKRO - Manual - 188
Playing on Your Controller
Playing Tools