Maschine mikro User Manual page 265

For more information on the Step Grid, see section
Nudge Grid.
This way it's easy to quickly put some drums together.
A typical 4/4 line in Step mode.
In Step mode events are created with following settings:
▪ The event pitch is set to the Sound's base key. To know how to change the base key of
your Sounds, see section
▪ The event velocity is defined by how hard you hit the pads, unless you have enabled the
Fixed Velocity option (see below).
▪ The event length is set to one step (hence, it depends on the current Step Grid settings).
▪ Obviously, the event position is defined by the pad you hit.
↑5.1.3, Adjusting the Base
Recording Patterns with the Step Sequencer
↑7.1.7, Adjusting the Step Grid and the
Key.
MASCHINE MIKRO - Manual - 265
Working with Patterns