Pre-Listening To Sounds - Maschine mikro User Manual

You can also recall the search query that was used to find the Sound currently loaded in
the focused Sound slot. See section
In your operating system, Sound files have the extension ".mxsnd" (MASCHINE 2) or
".msnd" (MASCHINE 1.x).
Please refer to chapter
4.2.1.1 Loading Sounds on Your Controller
On your controller, use the Browser to load Sounds:
▪ You can browse your MASCHINE Library for the desired Sound. For more information on
how to do this, please refer to section
▪ Alternatively you can recall the search query that was used to find the Sound currently
loaded in the focused Sound slot. See section
mation.
4.2.2

Pre-listening to Sounds

You can pre-listen to the Sounds of the focused Group as you set the focus on them in the
software. To do this:
Click the speaker button above the Sound List (or the Pad view) to enable/disable Sound
►
pre-listening in the focused Group:
When the speaker button is enabled, each time you set the focus on a Sound by clicking
→
it in the Sound List or in Pad view, this Sound will be played back. This is useful as
quick reminder of the various Sounds loaded in the Group.
↑3.7, Using Quick Browse
↑3, Browser for more information on the Browser.
↑3.2, Searching and Loading Files from the
↑3.7, Using Quick Browse
Managing Sounds, Groups, and Your Project
for more information.
Library.
for more infor-
MASCHINE MIKRO - Manual - 139
Managing Sounds