Snare - Clap - Maschine mikro User Manual

Element
SPECTRA Section
Mode
Decay
Amount
Modulation Page
As with all other engines and Drumsynths, the
ity.
Element
SCALE Section
Velocity
10.3.9 Snare – Clap
A stalwart of electronic music, the classic analog clap never really sounded like a group of peo-
ple clapping - but that makes it all the more iconic!
The parameters described below are presented as they appear in the Control area (Arrange
view). The same parameters are available in the Plug-in panel within the Plug-in Strip (Mix
view). See ↑9.4, The Plug-in Strip
Description
Selects from two different noise types that simulate the snare wires of the
drum. Available modes are A (default) and B.
Controls the length of the snare wires' sound independently from the main
cay parameter on the Main
(default: 40.0 %).
Adjusts the amount of snare wire sound applied to the drum, measured as a
percentage. Available values range from 0.0 to 100.0 % (default: 75.0 %).
Modulation
Description
Adjusts the velocity response of the drum. Available values range from
-100.0 % to 100.0 % (default value). At zero (mid course), the drum is played
at full velocity, no matter how hard you hit the keys (or pads). From that mid
position, by turning the knob to the right you increase the positive velocity re-
sponse and make the drum more and more sensitive to the velocities at which
you hit the keys/pads. From the mid position, turning the knob to the left as
the inverse effect: the harder you hit the key/pad, the softer the resulting drum
sound will be.
for more information on this.
page. Available values range from 0.0 to 100.0 %
page contains one parameter:
MASCHINE MIKRO - Manual - 441
Using the Drumsynths
The Snares
De-
Veloc-