Maschine mikro User Manual page 465

Element
ENVELOPE Section
Mode
Attack
Hold (Machine mode only)
Release
Advanced Page
For this engine the Advanced
Modulation Page
As with all other engines and Drumsynths, the
ity.
Element
SCALE Section
Velocity
Description
Selects from two envelope modes: Realistic (default) and Machine.
In Realistic mode the envelope uses curved attack and release stages for a
more natural sound.
In Machine mode the envelope uses linear attack, hold, and release stages for
a static, machine-like sound.
Adjusts the duration of the envelope's attack stage, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 40.0 %).
Adjusts the duration of the envelope's hold stage, i.e. the time during which
the envelope is held at its highest point, measured as a percentage. Available
values range from 0.0 % (default) to 100.0 %.
Adjusts the duration of the envelope's release stage, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 35.0 %).
page does not contain any parameters.
Modulation
Description
Adjusts the velocity response of the drum. Available values range from
-100.0 % to 100.0 % (default value). At zero (mid course), the drum is played
at full velocity, no matter how hard you hit the keys (or pads). From that mid
position, by turning the knob to the right you increase the positive velocity re-
sponse and make the drum more and more sensitive to the velocities at which
you hit the keys/pads. From the mid position, turning the knob to the left as
the inverse effect: the harder you hit the key/pad, the softer the resulting drum
sound will be.
page contains one parameter:
MASCHINE MIKRO - Manual - 465
Using the Drumsynths
The Percussions
Veloc-