Maschine mikro User Manual page 134

▪ Channel properties: Parameter adjustments apply to all selected Sounds/Groups for any pa-
rameter in any set of Channel properties. See chapter
and Macro Controls
▪ Plug-ins: Parameter adjustments apply to all selected Sounds/Groups that have the same
Plug-in loaded in the same Plug-in slot. See chapter
information on Plug-ins.
▪ Pad view: Base key, Choke group, and Link group settings apply to all selected Sounds.
See section ↑5.1, Adjusting Your Pads
▪ You can move multiple Sound slots or multiple Groups at once. See section
ing Sounds and ↑4.3.7, Moving Groups
▪ You can reset multiple Sound slots and delete multiple Groups at once. See section
↑4.2.8, Resetting Sound Slots
The adjustments made in the Assignment area are never mirrored in any other selected
Sound/Group.
Furthermore, the exact influence on the equivalent parameter in the affected Sounds/Groups
depends on the type of parameter:
▪ Continuous parameters (knob): the values in all selected Sounds/Groups are incremented/
decremented by the same amount as the value in the focused Sound/Group. Values are
clipped when they reach their range limit.
▪ Discrete parameter (button or selector): the values in all selected Sounds/Groups are set
to the value of the focused Sound/Group.
Selecting Multiple Sounds/Groups in the Software
To select multiple Sounds or multiple Groups in the MASCHINE software, simply use the com-
mon keyboard shortcuts of your operating system: in the Sound List or the Pad view for
Sounds, and in the Group List for Groups. Following actions are available:
Action
Selecting Objects (Sounds or Groups)
Click unselected object
for more information on the Channel properties.
for more information on these settings.
for more information.
and ↑4.3.8, Deleting Groups
Managing Sounds, Groups, and Your Project
↑8, Audio Routing, Remote Control,
↑6, Working with Plug-ins
for more information.
Function
Selects the object and sets the focus to it.
Overview of the Sounds, Groups, and Master
for more
↑4.2.7, Mov-
MASCHINE MIKRO - Manual - 134