Following The Playback Position In Your Project - Maschine mikro User Manual

You can also use the Left/Right Arrow buttons and the Control encoder to adjust the zoom
factor and scroll position on the display.
In View mode, pads
Browser, the Control Lane, and the Mixer (in Mix view) in the software, respectively. See
section ↑2.2, Adjusting the MASCHINE User Interface
13.1.3

Following the Playback Position in Your Project

If the Arranger doesn't display the entire Loop Range currently selected, at some point the
playhead will go beyond the portion of your Project currently displayed in the Arranger and you
might loose track of the playback position. To prevent this, you can force the Arranger to follow
the playhead:
Activate the Follow button to keep following the playhead in the Arranger.
To follow the playhead position in the Arranger during playback, click the Follow button
►
in the MASCHINE Header.
The Follow button lights up in the MASCHINE Header. The Arranger will now switch to
→
the next portion of your Project (with the same zoom factor) as soon as the playhead rea-
ches the end of the portion currently displayed. This way, you always see the portion of
your Project that is currently played.
The Follow function will be automatically disabled as soon as you manually scroll in the Ar-
ranger or the Pattern Editor (in the software or from your controller).
13–15 additionally allow you to show/hide (or maximize/minimize) the
Creating a Song Using Scenes
for more information.
MASCHINE MIKRO - Manual - 557
Arranger Basics