Maschine mikro User Manual page 664

Press and turn the Control encoder to adjust the parameters in finer increments.
Page 5 – MAP Parameters
The MAP page contains the parameters defining the key and velocity ranges of the Zone.
The ZONE page on the controller, page 5 of 5: MAP parameters.
Parameter
KEY LO (Lowest Key)
KEY HI (Highest Key)
VEL LO (Lowest Velocity)
VEL HI (Highest Velocity)
At any time you can visually check the key and velocity ranges of the Zone in the Map view
of the Slice page in the software. See section
Map View for more information on the Map view.
2 Page 2: Pitch / Envelope [➙ 215]
Description
Sets the lowest note (key) of the focused Zone.
Sets the highest note (key) of the focused Zone.
Defines the lowest velocity of the focused Zone.
Defines the highest velocity of the focused Zone.
↑14.5.5, Selecting and Editing Zones in the
Sampling and Sample Mapping
Mapping Samples to Zones
MASCHINE MIKRO - Manual - 664