Borderless Printing By Resizing Originals To Fit The Roll Width (Mac Os) - Canon imagePROGRAF iPF685 User Manual

Hide thumbs Also See for imagePROGRAF iPF685:
Table of Contents

Advertisement

iPF685
10
B
Select the
Borderless Printing check box to dis-
play the Information dialog box.
11
Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm).
12
Click OK to close the Information dialog box.
13
C
In
Borderless Printing Method, make sure
14
Confirm the print settings and print as desired.
For tips on confirming print settings, see "Confirming Print Settings ."
Note

Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS)

Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS)
This topic describes how to enlarge originals before borderless printing to match the roll width, based on the follow-
ing example.
When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at
the edges. If you require higher image quality, select No from the Automatic Cutting list in the Paper Detailed
Important
Settings dialog box. In this case, the paper can be printed without borders on the left and right sides only. Once
printed and cut, please cut the upper and lower bands with scissors.
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Roll
Paper type: Canon Heavyweight Coated Paper
Roll paper width: 10 inches (254.0 mm)
User's Guide
Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS)
E
Scale to fit Roll Paper Width is selected.
P.145
85

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents