Borderless Printing By Resizing Originals To Fit The Roll Width (Mac Os) - Canon imagePROGRAF iPF6400SE User Manual

Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS)

10
B
Select the
the Information dialog box.
11
Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm).
12
Click OK to close the Information dialog box.
13
C
In Borderless Printing Method, make sure
14
Confirm the print settings and print as desired.
•
Note
Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS) Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS)
This topic describes how to enlarge originals before borderless printing to match the roll width, based on the following
example.
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the Roll Holder.
(See "Loading Rolls on the Roll Holder.")
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
•
When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at the
edges. If you require higher image quality, select No from the Automatic Cutting list in the Paper Detailed Settings
Important
dialog box. In this case, the paper can be printed without borders on the left and right sides only. Once printed and
cut, please cut the upper and lower bands with scissors.
• Document: Any type
• Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Roll
•
• Paper type: Canon Heavyweight Coated Paper
• Roll paper width: 10 inches (254.0 mm)
84
Borderless Printing check box to display
For tips on confirming print settings, see "Confirming Print Settings ."
P.363
➔
E
Scale to fit Roll Paper Width is selected.
P.154
➔
iPF6400SE
User's Guide