Borderless Printing By Resizing Originals To Fit The Roll Width (Mac Os) - Canon imagePROGRAF iPF771 User Manual

iPF770
10
B
Select the Borderless Printing check box to dis-
play the Information dialog box.
11
Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm).
12
Click OK to close the Information dialog box.
13
C
In Borderless Printing Method, make sure
14
Confirm the print settings and print as desired.
•
For tips on confirming print settings, see "Confirming Print Settings ."
Note

Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS)

Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS)
This topic describes how to enlarge originals before borderless printing to match the roll width, based on the follow-
ing example.
•
When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at
the edges. If you require higher image quality, select No from the Automatic Cutting list in the Paper Detailed
Important
Settings dialog box. In this case, the paper can be printed without borders on the left and right sides only. Once
printed and cut, please cut the upper and lower bands with scissors.
• Document: Any type
• Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Roll
•
• Paper type: Canon Glossy Photo Paper 170gsm
• Roll paper width: 10 inches (254.0 mm)
1
Choose Page Setup from the application menu to
display the Page Attributes dialog box.
User's Guide
Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS)
E
Scale to fit Roll Paper Width is selected.
P.143
➔
83