Mbf Sensor; Bottom Plate Assembly - Star Micronics LS-5 SERIES Technical Manual

REPLACEMENT AND ADJUSTMENTS OF PARTS

3-15. MBF Sensor

(1) Remove the following units:
• Pick up roll assembly (according to the procedure
described in section 3-12)
• MBF spring [1]
• Two screws [2]
• Connector (P/J121) [3]
• MBF sensor [4]

3-16. Bottom Plate Assembly

(1) Remove the following units:
• Pick up roll assembly (according to the procedure
described in section 3-12)
(2) Remove the spring [1] from the screw [2]. The spring
[1] is hooked onto the screw [2] that projects from the
bottom plate assembly [3].
Remove the bottom plate assembly [3].
(3)
Caution when assembling:
Insert the MBF actuator [4] in the notch [5] in the bottom
plate assembly [3], and attach the bottom plate assembly
[3].
– 39 –