REPLACEMENT AND ADJUSTMENTS OF PARTS
2-7. Feeder PCB
(1)
Remove the following units:
• Cassette
• Feed housing R, gear in, and gear out (according
to the procedure described in section 2-2)
• Two screws [1]
• Three connectors (P/J116, P/J201, P/J202) [2]
• Feeder PCB [3]
2-8. Size Spring
(1)
Remove the following units:
• Feeder PCB (according to the procedure described
in section 2-7)
• Screw [1]
• Size spring [2]
– 30 –