REPLACEMENT AND ADJUSTMENTS OF PARTS
3-11. Front Plate Assembly
(1)
Remove the following units:
• Trans. chute assembly (according to the proce-
dure described in section 3-8)
• Inlet chute assembly (according to the procedure
described in section 3-9)
• Six screws [1]
• Front plate assembly [2]
3-12. Pick Up Roll Assembly
(1)
Remove the following units:
• Inlet chute assembly (according to the procedure
described in section 3-9)
• Two screws [1]
• Pick up roll assembly [2]
– 37 –